3.5'' SST LIFT KIT FRONT WITH 2'' REAR WITH FABRICATED CONTROL ARMS AND BILSTEIN SHOCKS- GM SILVERADO / SIERRA 2500HD 2020-2021

2020-2021 GM 2500/3500 HD including AT4 

3.5" Front/ 2" Rear SST Lift Kit

SST lift specific Forged Torsion Keys with new F/R Bilstein 5100 series shocks, Xtreme-Duty fabricated steel upper control arms, heavy-duty tie rods, differential spacers, new longer bump stops, and longer hardware.

Allows for 20x9 0 offset - 35x12.50 tire. *Max with trimming: 20x10 -18 offset - 35x12.50

Some fender well variance may be experienced between Silverado and Sierra models.

Can be used on trucks equipped with factory snow prep/plow packages.

Works with trucks equipped with either the OE #84461807 or OE #84634344 factory torsion keys and requires ReadyLIFT torsion key unloading tool 66-7822B or similar for installation.

NOTE: Use of Auto 4 Hi feature not recommended. Currently does not fit 2022-2021 AT4 applications.

Special Note:  When setting the torsion key adjustment bolt do not exceed 27.5” from the wheel center to the fender edge. Exceeding this will create a top off condition, meaning the suspension has little to no down travel. The result is poor ride quality, and premature wear of components.